Force Monitoring in a Maxilla Model and Dentition Using Optical Fiber Bragg Gratings

• Main Authors: Hypolito José Kalinowski, Ilda Abe, Leandro Grabarski, Cicero Martelli, Jean Carlos Cardozo da Silva, Maura Scandelari Milczewski
• Format: Article
• Language: English
• Published: MDPI AG 2012-08-01
• Series: Sensors
• Subjects: orthodontic forces; maxilla; fiber Bragg gratings; optical fiber sensors
• Online Access: http://www.mdpi.com/1424-8220/12/9/11957
• ISSN: 1424-8220

The aim of this work is to show the possibility of using fiber optic sensors to instrument inside parts of an artificial maxilla and measure internal tension transmitted by the orthodontic and orthopedic appliances to the dentition and the adjacent bone. Bragg gratings written in a standard optical fiber were used to monitor the maxillary teeth and a multiplexed fiber was used to monitor the surface of the maxillary bone, transversally to the longest axis of the teeth. A Universal Test Machine was used to evaluate the sensitivity of the sensor to the vertical and lateral forces applied on the teeth. A wavelength shift of approximately 0.30 nm was detected when applying loads ranging from 0 to 20 N. By applying forces using the standard orthodontic appliances installed on the dentition it was possible to detect a range of forces between 0.025 N to 0.035 N during the activation of the arch wire and extra-oral forces. The use of the internal sensors in an artificial model made possible the monitoring of the resulting forces on the internal parts of the teeth and at the position where the strain takes place within the maxilla. The sensors detected that the orthodontic forces were not transmitted to the surface of the maxilla. This information is important to elucidate and to correlate undesirable effects as tooth root absorption and local pain during the orthodontic treatment.