Optimized biological nitrogen removal of high-strength ammonium wastewater by activated sludge modeling
Wastewater containing high ammonium concentrations is produced from various industrial activities. In this study, the author used a complex activated sludge model, improved by utilizing BioWin© (EnviroSim, Hamilton, Canada) simulation software, to gain understanding of the problem of instability in...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
IWA Publishing
2018-09-01
|
| Series: | Journal of Water Reuse and Desalination |
| Subjects: | |
| Online Access: | http://jwrd.iwaponline.com/content/8/3/393 |
| Summary: | Wastewater containing high ammonium concentrations is produced from various industrial activities. In this study, the author used a complex activated sludge model, improved by utilizing BioWin© (EnviroSim, Hamilton, Canada) simulation software, to gain understanding of the problem of instability in biological nitrogen removal (BNR). Specifically, the study focused on BNR in an industrial wastewater treatment plant that receives high-strength ammonium wastewater. Using the data obtained from a nine-day sampling campaign and routinely measured data, the model was successfully calibrated and validated, with modifications to the sensitive stoichiometric and kinetic parameters. Subsequently, the calibrated model was employed to study various operating conditions in order to optimize the BNR. These operating conditions include alkalinity addition, sludge retention time, and the COD/N ratio. The addition of a stripping step and modifications to the configuration of the aerators are suggested by the author to increase the COD/N ratio and therefore enhance denitrification. It was found that the calibrated model could successfully represent and optimize the treatment of the high-strength ammonium wastewater. |
|---|---|
| ISSN: | 2220-1319 2408-9370 |