Improvement of mechanical processing equipment due to synthesis of initial circuits of outpole gears
The synthesis of the initial contours of the teeth of out-of-pole gears on parallel axes according to the criterion of the contact strength of the working surfaces is presented, the geometric parameters of the original contours of the gear teeth with high contact strength of the working surfaces are...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | deu |
| Published: |
Academician I.G. Petrovskii Bryansk State University
2021-06-01
|
| Series: | Naučno-Tehničeskij Vestnik Brânskogo Gosudarstvennogo Universiteta |
| Subjects: | |
| Online Access: | https://ntv-brgu.ru/wp-content/arhiv/2021-N2/2021-02-06.pdf |
| Summary: | The synthesis of the initial contours of the teeth of out-of-pole gears on parallel axes according to the criterion of the contact strength of the working surfaces is presented, the geometric parameters of the original contours of the gear teeth with high contact strength of the working surfaces are determined. An assessment was carried out according to the following performance criteria: power loss in the engagement, the thickness of the oil layer, the specific work of friction forces, galling. transmission. |
|---|---|
| ISSN: | 2413-9920 |