| Summary: | Increasing the ingot size of GH4720Li superalloys makes it difficult to control their microstructure, and the withdrawal rate is an important factor in controlling and refining the microstructure of GH4720Li superalloys. In this study, GH4720Li superalloy samples were prepared via Bridgman-type directional solidification with different withdrawal rates. The morphology and average size of the dendrites in the stable growth zone during directional solidification in each sample, morphology and average size of the γ’ phases, and microsegregation of each alloying element were analyzed using optical microscopy, Photoshop, Image Pro Plus, field emission scanning electron microscopy, and electron probe microanalysis. Increasing the withdrawal rate significantly helped in refining the superalloy microstructure; the average secondary dendrite arm spacing decreased from 133 to 79 µm, whereas the average sizes of the γ’ phases in the dendrite arms and the interdendritic regions decreased from 1.02 and 2.15 µm to 0.69 and 1.26 µm, respectively. Moreover, the γ’ phase distribution became more uniform. The microsegregation of Al, Ti, Cr, and Co decreased with the increase in the withdrawal rate; the segregation coefficients of Al, Cr, and Co approached 1 at higher withdrawal rates, whereas that of Ti remained above 2.2 at all the withdrawal rates.
|
|---|
