Comparison between wet and dry timber visual strength grading according to the Spanish (UNE 56544) and German (DIN 4074-1) standards

• Main Authors: D. F. Llana, F. Arriaga, M. Esteban, G. Íñiguez-González
• Format: Article
• Language: English
• Published: Consejo Superior de Investigaciones Científicas 2019-12-01
• Series: Materiales de Construccion
• Subjects: wood; detection of cracks; mechanical properties; modulus of elasticity; dry grading
• Online Access: http://materconstrucc.revistas.csic.es/index.php/materconstrucc/article/view/2268

Visual strength grading is widely used to estimate mechanical properties of structural timber. National visual grades are allocated to strength classes according to European standard EN1912. The recent discussion about the proper function of visual strength grading standards and the assignment of strength classes shows the need for further research in this field. Spanish-sourced radiata, Scots, Salzmann and maritime pine timber samples were visually graded in wet and dry condition according to the Spanish UNE56544 (2011) and German DIN4074-1 (2012) standards. Rejection was far higher dry due to distortion (warping) parameters. However, this rejection could be significantly mitigated by adopting a higher twist limit (2 mm / 25 mm width). UNE 56544 is more suitable for visually grading these species because it was specifically designed for them and a Spanish source. However, both standards underestimated the Scots pine rejection pieces which mechanical properties fulfill the MEG and S10 grades.