Experimental and Numerical Investigation on the Layering Configuration Effect to the Laminated Aluminium/Steel Panel Subjected to High Speed Impact Test

• Main Authors: Najihah Abdul Rahman, Shahrum Abdullah, Mohamad Faizal Abdullah, Wan Fathul Hakim Zamri, Mohd Zaidi Omar, Zainuddin Sajuri
• Format: Article
• Language: English
• Published: MDPI AG 2018-09-01
• Series: Metals
• Subjects: ballistic impact; ballistic test; double-layered plate; failure; numerical simulation
• Online Access: http://www.mdpi.com/2075-4701/8/9/732
• ISSN: 2075-4701

This paper presents the effect of laminated aluminium-steel panel with different configurations in a high-speed impact test. Layering aluminium plate with high strength steel has become an interest in reducing the overall density of armour vehicle body while improving the ballistic resistance. Different layering configurations differ in laminated panel performance. Two layering configurations of double-layered panel achieving 25% of existing panel weight reduction were tested using experiment and computational method to investigate their behaviours when impacted with 7.62-mm full metal jacket at velocity range of 800–850 m/s. The ballistic performance of each configuration plate in terms of ballistic limit velocity, penetration process and permanent deformation was quantified and considered. Laminated panel with aluminium as the front layer reduced the ballistic performance of existing panel to 50% and the other panel maintained its performance. Thus, the laminated panel with aluminium as the back layer can be used in designing a protective structure for armoured vehicle while maintaining the performance of the existing vehicle in achieving weight reduction.