Investigation of Mechanical Properties in Brazing of Ti-6Al-4V and SS410 in Vacuum
In this research, Ti-6Al-4V alloy was brazed with 410 stainless steel by three different filler metals as silver-base, nickel-base, and titanium-base alloys. In order to obtain optimum clearance, brazing was done in three different clearances of 0.02, 0.04 and 0.06 mm. Also, the strength and hardnes...
Main Authors: | reza eshghi, s.m.hadavi, v.varmazyar |
---|---|
Format: | Article |
Language: | fas |
Published: |
Isfahan University of Technology
2015-03-01
|
Series: | Journal of Advanced Materials in Engineering |
Subjects: | |
Online Access: | http://jame.iut.ac.ir/article-1-593-en.html |
Similar Items
-
Diffusion Brazing of Ti-6Al-4V and Stainless Steel 316L Using AgCuZn Filler Metal
by: R. Soltani Tashi, et al.
Published: (2013-09-01) -
Impact of Tin and Nickel on the Brazing Properties of Silver Filler Metals and on the Strength of Brazed Joints Made of Stainless Steels
by: Winiowski A., et al.
Published: (2013-12-01) -
Effect of brazing temperature on microstructure and mechanical properties of dissimilar joints of titanium/stainless steel joint brazed by Al interlayer
by: Bartłomiej Szwed, et al.
Published: (2017-06-01) -
The Microstructural Evolution of Vacuum Brazed 1Cr18Ni9Ti Using Various Filler Metals
by: Yunxia Chen, et al.
Published: (2017-04-01) -
Qualification of brazing procedure for furnace brazing of austenitic steel according to requirements of the ASME BPVC section IX
by: Grzegorz Rogalski, et al.
Published: (2019-11-01)