| Summary: | Dibenzyl disulfide (DBDS) is the major corrosive sulfur compound in mineral insulating oils, which will corrode the copper wires of windings in the oil-immersed power transformers and reactors and eventually cause operation failures. This paper studies the method to eliminate DBDS in insulation oils using the Polyethylene Glycol Sodium (Na-PEG) reagent. The preparation method of the Na-PEG reagent from NaOH and polyethylene glycol 400 is studied in the laboratory. The effect of the Na-PEG reagent dosage and reaction temperature on eliminating DBDS in insulating oils is studied, and a treatment process is recommended. An automatic processing device to remove DBDS from the transformer oil is developed, and the short-term electrical properties and long-term thermal stability of the insulating oil after the Na-PEG reagent treatment are tested. The results show that the Na-PEG reagent can efficiently eliminate DBDS in the insulating oil (the DBDS concentration decreases from 448 mg/kg to less than 5 mg/kg (undetectable) within 1 hour) and will not significantly negatively affect the oil properties such as the breakdown strength at the power frequency, dissipation factor or acidity. A preliminary exploration of the reaction mechanism is explored.
|
|---|
