Brazing Ti-48Al-2Nb-2Cr Alloys with Cu-Based Amorphous Alloy Filler
In this work, the Ti-48Al-2Nb-2Cr (at. %) alloy was successfully brazed using a Cu-based amorphous filler in 600 s under varied brazing temperatures. The element diffusion, microstructure, and precipitation phase of the joints are analyzed in detail, and the formation schemes are discussed. Reaction...
Main Authors: | Gang Wang, Peng Wu, Wei Wang, Dongdong Zhu, Caiwang Tan, Yongsheng Su, Xinying Shi, Wei Cao |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2018-06-01
|
Series: | Applied Sciences |
Subjects: | |
Online Access: | http://www.mdpi.com/2076-3417/8/6/920 |
Similar Items
-
Microstructural and Corrosion Properties of Ti-to-Zr Dissimilar Alloy Joints Brazed with a Zr-Ti-Cu-Ni Amorphous Filler Alloy
by: Si-Young Lee, et al.
Published: (2021-01-01) -
Effect of Interface Microstructure on Joint Strength of Zirconia/Titanium Alloy Brazed with Amorphous Zr-Ti-Ni-Cu Active Filler Metal
by: Sung Woo Park, et al.
Published: (2020-05-01) -
A Ti–Zr–Cu–Ni–Co–Fe–Al–Sn amorphous filler metal for improving the strength of Ti–6Al–4V alloy brazing joint
by: Lulu Sun, et al.
Published: (2017-12-01) -
Interface microstructure of the brazed zirconia and Ti-6Al-4V using Ti-based amorphous filler
by: Liu Y., et al.
Published: (2013-01-01) -
Vacuum brazing ZSCf composite ceramics to TC4 alloy with Ag-Cu filler
by: Wei Wang, et al.
Published: (2020-07-01)