Impregnation of Fibrous Materials with Lc Polyesters and Blends on Their Base

• Main Authors: Kotomin S. V., Antonov S. V., Dreval V. E., Kerber M. L., Kulichikhin V. G.
• Format: Article
• Language: English
• Published: De Gruyter 2000-04-01
• Series: Applied Rheology
• Subjects: impregnation; infiltration; polymer blends; fibres; yield stress; melt flow; slippage
• Online Access: https://doi.org/10.1515/arh-2000-0004
• ISSN: 1617-8106

Impregnation and infiltration of fibrous materials by LC copolyester melts and the blends with viscous thermo-plastic polysulphone were quantitatively described as unsteady and steady stages in terms of rheological characteristics of the melts using an equivalent capillary model. Addition of LC polyester to viscous thermoplastic melt noticeably enhances impregnation condition. Study of the melt flow through various capillaries demonstrated a development of the melt slippage at high shear rate along the capillary walls. Slippage phenomena may be important at the initial stage of impregnation but can be neglected for final stage due to low shear rate in the last case. On the other hand, at those conditions a yield stress of the melt may considerably complicate the impregnation process due to a drastic viscosity increase.