Effect of tribological conditions for properties thermal spraying
The present contribution deals with the influence of tribological conditions on coating quality. Two types of coatings were selected for analysis WC-WB-CO and WC-FeCrAl, to advise that a new type of coating - carbide green. These coatings were applied to the base material AISI 316L of technology...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Printing House The Managers of Quality and Production Association
2017-04-01
|
| Series: | Production Engineering Archives |
| Subjects: | |
| Online Access: | http://www.qpij.pl/en/attachment/id/672 |
| Summary: | The present contribution deals with the influence of tribological conditions on coating quality. Two
types of coatings were selected for analysis WC-WB-CO and WC-FeCrAl, to advise that a new type
of coating - carbide green. These coatings were applied to the base material AISI 316L of technology
HVOF – High velocity oxygen fuel. The aim of the experimental study was to determine the quality
coatings and its resistance to abrasive wear, depending on the number of thermal cycles. It was
evaluated hardness, thickness, the resistance to abrasive wear in free abrasives and firmly bonded
abrasives. Results of experiments showed a higher resistance of the coating WC-Co-WB. |
|---|---|
| ISSN: | 2353-5156 2353-7779 |