Analyzing Surface Roughness of an Auto-Truck Cylinder After Several Running Hours
Present paper aims to present the measuring process and results regarding roughness of the inner surface of a truck cylinder, according to standard (STAS 6635-87). To that purpose, it was used a Surtronic SSeries roughness tester, with a stylus able to measure within the range 400 μm. According to...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Danubius University
2021-06-01
|
| Series: | EIRP Proceedings |
| Subjects: | |
| Online Access: | https://dp.univ-danubius.ro/index.php/EIRP/article/view/183/199 |
| Summary: | Present paper aims to present the measuring process and results regarding roughness of the inner
surface of a truck cylinder, according to standard (STAS 6635-87). To that purpose, it was used a Surtronic SSeries
roughness tester, with a stylus able to measure within the range 400 μm. According to the beforementioned
standard, there were performed 4 measurements on the same circular line, each one shifted by 90
degrees to the previous. The process was repeated on eight functional areas characteristic to the cylinder (entire
length was divided into eight equal parts). With the use of measured values, it was possible to analyze whether
the cylinder's inner surface had proper roughness according to specific standards, even after several functioning
cycles. |
|---|---|
| ISSN: | 2067-9211 2069-9344 |