Robust Functionalization of Large Microelectrode Arrays by Using Pulsed Potentiostatic Deposition

• Main Authors: Joerg Rothe, Olivier Frey, Rajtarun Madangopal, Jenna Rickus, Andreas Hierlemann
• Format: Article
• Language: English
• Published: MDPI AG 2016-12-01
• Series: Sensors
• Subjects: electrodeposition; microelectrode array; pulse potential waveform; voltage pulses; pulsed potentiostatic deposition; complementary metal-oxide-semiconductor (CMOS); platinum; gold; poly(phenylenediamine) PPD; poly(ethylenedioxythiophene) PEDOT
• Online Access: http://www.mdpi.com/1424-8220/17/1/22

Surface modification of microelectrodes is a central step in the development of microsensors and microsensor arrays. Here, we present an electrodeposition scheme based on voltage pulses. Key features of this method are uniformity in the deposited electrode coatings, flexibility in the overall deposition area, i.e., the sizes and number of the electrodes to be coated, and precise control of the surface texture. Deposition and characterization of four different materials are demonstrated, including layers of high-surface-area platinum, gold, conducting polymer poly(ethylenedioxythiophene), also known as PEDOT, and the non-conducting polymer poly(phenylenediamine), also known as PPD. The depositions were conducted using a fully integrated complementary metal-oxide-semiconductor (CMOS) chip with an array of 1024 microelectrodes. The pulsed potentiostatic deposition scheme is particularly suitable for functionalization of individual electrodes or electrode subsets of large integrated microelectrode arrays: the required deposition waveforms are readily available in an integrated system, the same deposition parameters can be used to functionalize the surface of either single electrodes or large arrays of thousands of electrodes, and the deposition method proved to be robust and reproducible for all materials tested.