Enhancement of Capacitive Performance in Titania Nanotubes Modified by an Electrochemical Reduction Method

• Main Authors: Nurul Asma Samsudin, Zulkarnain Zainal, Hong Ngee Lim, Yusran Sulaiman, Sook-Keng Chang, Ying-Chin Lim, Wardatun Nadrah Mohd Amin
• Format: Article
• Language: English
• Published: Hindawi Limited 2018-01-01
• Series: Journal of Nanomaterials
• Online Access: http://dx.doi.org/10.1155/2018/9509126
• ISSN: 1687-4110; 1687-4129

Highly ordered titania nanotubes (TNTs) were synthesised by an electrochemical anodization method for supercapacitor applications. However, the capacitive performance of the TNTs was relatively low and comparable to the conventional capacitor. Therefore, in order to improve the capacitive performance of the TNTs, a fast and facile electrochemical reduction method was applied to modify the TNTs (R-TNTs) by introducing oxygen vacancies into the lattice. X-ray photoelectron spectroscopy (XPS) data confirmed the presence of oxygen vacancies in the R-TNTs lattice upon the reduction of Ti4+ to Ti3+. Electrochemical reduction parameters such as applied voltage and reduction time were varied to optimize the best conditions for the modification process. The electrochemical performance of the samples was analyzed in a three-electrode configuration cell. The cyclic voltammogram recorded at 200 mV s−1 showed a perfect square-shaped voltammogram indicating the excellent electrochemical performance of R-TNTs prepared at 5 V for 30 s. The total area of the R-TNTs voltammogram was 3 times larger than the unmodified TNTs. A specific capacitance of 11.12 mF cm−2 at a current density of 20 μA cm−2 was obtained from constant current charge-discharge measurements, which was approximately 57 times higher than that of unmodified TNTs. R-TNTs also displayed outstanding cycle stability with 99% capacity retention after 1000 cycles.