Pembuatan lem sintetik dan aplikasinya pada alas kaki

• Main Authors: Arum Yuniari, Herminiwati Herminiwati
• Format: Article
• Language: English
• Published: Center for Leather, Rubber, and Plastics 2008-12-01
• Series: Majalah Kulit, Karet, dan Plastik
• Subjects: synthetic adhesive; chloroprene rubber; footwear
• Online Access: http://ejournal.kemenperin.go.id/mkkp/article/view/313/289

Footwear can be categorized as one of labour intensive and very superior export commodities, consequently the product quality must be maintained and be continually improved. The quality parameter of footwear is determined by the bonding strength between the uppers and the soles, it means that it depends on the adhesive applied. Soling system is widely applied in small and medium industries are cemented system used synthetic adhesive. Now, the adhesive was applied in the manufacturing of foot wear supported by binding of the soles and the uppers is easy to peel off because of the poor bonding strength. The aim of the research was to investigate a suitable synthetic adhesive formula to used in footwear manufacturing. In preparing of the adhesive formula, the effect of phenolic resin addition as tackifier were varies i.e 35, 45 and 55 phr using chloroprene rubber as raw material were observed. Synthetic adhesive compound was produce by two roll mill after that compound were dissolved in toluene with ratio 1 : 3. The prepared adhesive then was applied to manufacture footwear using cool press system. The soles used in the experiment were made of rubber and plastic material whereas the uppers made of either leather or artificial leather. The test result and data analysis showed that adhesive performed for the highest bonding strength as much as 1000 g/cm and decrease to lowest bonding strength after soaking in to water for 500 seconds one percent was obtained by the following formula that were : chloroprene rubber 100 phr, butylated hydroxyl toluene 2 phr, magnesium oxide 4 phr, zinc oxide 5 phr and phenolic resin 45 phr. The prepared formula performed a better bonding strength when it was compared with chloroperene rubber adhesive in market. The application of this prepared formula in making ladies shoes performed good bonding strength and accordance with the requierments of SNI 12-2942-1992 about Leather Pantopel Style Cemented System Ladies Shoes.