The Analysis of Force Parameters in Drawing Process of High Carbon Steel Wires in Conventional and Hydrodynamic Dies
The paper analyzes force parameters in the process of multistage drawing of steel wires in conventional and hydrodynamic dies. The drawing process of the wire rod with a diameter of 5.5 mm for wires with a diameter of 1.70 mm was performed in 12 drafts with the usage of the multistage drawbench Koch...
Main Author: | |
---|---|
Format: | Article |
Language: | English |
Published: |
Polish Academy of Sciences
2017-12-01
|
Series: | Archives of Metallurgy and Materials |
Subjects: | |
Online Access: | http://www.degruyter.com/view/j/amm.2017.62.issue-4/amm-2017-0329/amm-2017-0329.xml?format=INT |
Summary: | The paper analyzes force parameters in the process of multistage drawing of steel wires in conventional and hydrodynamic dies. The drawing process of the wire rod with a diameter of 5.5 mm for wires with a diameter of 1.70 mm was performed in 12 drafts with the usage of the multistage drawbench Koch KGT with the speed range of 5-25 m/s. |
---|---|
ISSN: | 2300-1909 |