| Summary: | Ultrasonic transducer based on rare-earth giant magnetostrictive materials was designed in accordance with the technical requirements of ultrasonic surface strengthening. The whole structure of the transducer was designed. Modal analysis is made to get the natural frequency of the compound oscillator. The working frequency of the transducer should be guaranteed at about 15.2 kHz and the composite oscillator should have relatively better vibration mode. The magnetic field of the transducer is well sealed and the transducer will not show obvious magnetic flux leakage phenomenon. Which shows the rationality of structural design. Based on this transducer, the ultrasonic surface strengthening experiment on 40 steel was conducted. The surface roughness and hardness of the parts were analyzed after the experiment. The results show that the surface of the parts reach the mirror surface result after the ultrasonic strengthening. When compared to the previous process, the roughness decreases by about 75%, and the surface hardness increases by more than 20%.
|
|---|
