The Effect of Moisture Content on the Tar Characteristic of Wood Pellet Feedstock in a Downdraft Gasifier

• Main Authors: Rizqi Fitri Naryanto, Hiroshi Enomoto, Anh Vo Cong, Kazuki Fukadu, Zheng Zong, Mera Kartika Delimayanti, Chuntima Chunti, Reiji Noda
• Format: Article
• Language: English
• Published: MDPI AG 2020-04-01
• Series: Applied Sciences
• Subjects: wood pellet; moisture content; tar formation; tar classification; tar density
• Online Access: https://www.mdpi.com/2076-3417/10/8/2760

This study examined the tar characteristic of wood pellet using a downdraft gasifier system. The wood pellet was used as a feedstock with a variation of moisture content between 2 to 6 wt. %. Tar sample was taken using the JP 2009-40885 method. Gas chromatography mass spectrometry and gravimetric analysis were used to identify and to analyze the tar sample, respectively. The results show that an increase in moisture content slightly decreased the total concentration of tar formation on the nine tar compounds of the biomass. Additionally, the lowest moisture content produced the highest amount of light tar on tar classification. The amount of light tar indicates the ease of ignition in the gasifier. Therefore, this condition will minimize the failure-of-equipment problem because of no clogs in the gasifier equipment. The lowest moisture content had the lowest tar density, and this minimized the deposit of tar in the gasifier. Therefore, the lowest moisture content had low tar production in the biomass gasification process using wood pellets.