Testing of adhesive spray painting with robot

Testing of adhesive spray painting with robot

This article aims at setting appropriate parameters for robotic spraying of adhesives used in industry. The robot ABB IRB 1600 was used in a non-explosive environment. The adhesive was dispensed from pressure sweat and applied by a Krautzberger RA5 spray head. The article describes a detailed diagra...

Full description

Bibliographic Details
Main Authors: Marek Sukop, Mikuláš Hajduk, Ján Semjon, Jozef Varga, Rudolf Jánoš, Marek Vagaš, Martin Bezák, Ivan Virgala
Format: Article
Language:English
Published: Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek 2017-01-01
Series:Tehnički Vjesnik
Subjects:
adhesive
painting gun
pressure pot
robot
Online Access:https://hrcak.srce.hr/file/274471
Description
Summary:This article aims at setting appropriate parameters for robotic spraying of adhesives used in industry. The robot ABB IRB 1600 was used in a non-explosive environment. The adhesive was dispensed from pressure sweat and applied by a Krautzberger RA5 spray head. The article describes a detailed diagram for automatic connection of a painting gun. The results of the individual tests are shown in the tables and the dependencies of the individual parameters are described in the graphs. Depending on the amount of spray applied, the best samples are evaluated according to the adhesive manufacturer's recommendations.
ISSN:1330-3651
1848-6339

Similar Items