Ge pMOSFETs with GeO x Passivation Formed by Ozone and Plasma Post Oxidation

Abstract A comparison study on electrical performance of Ge pMOSFETs with a GeO x passivation layer formed by ozone post oxidation (OPO) and plasma post oxidation (PPO) is performed. PPO and OPO were carried out on an Al2O3/n-Ge (001) substrate followed by a 5-nm HfO2 gate dielectric in situ deposit...

Full description

Bibliographic Details
Main Authors: Yang Xu, Genquan Han, Huan Liu, Yibo Wang, Yan Liu, Jinping Ao, Yue Hao
Format: Article
Language:English
Published: SpringerOpen 2019-04-01
Series:Nanoscale Research Letters
Subjects:
Online Access:http://link.springer.com/article/10.1186/s11671-019-2958-2
Description
Summary:Abstract A comparison study on electrical performance of Ge pMOSFETs with a GeO x passivation layer formed by ozone post oxidation (OPO) and plasma post oxidation (PPO) is performed. PPO and OPO were carried out on an Al2O3/n-Ge (001) substrate followed by a 5-nm HfO2 gate dielectric in situ deposited in an ALD chamber. The quality of the dielectric/Ge interface layer was characterized by X-ray photoelectron spectroscopy and transmission electron microscopy. The PPO treatment leads to a positive threshold voltage (V TH) shift and a lower I ON/I OFF ratio, implying a poor interface quality. Ge pMOSFETs with OPO exhibit a higher I ON/I OFF ratio (up to four orders of magnitude), improved subthreshold swing, and enhanced carrier mobility characteristics as compared with PPO devices. A thicker Al2O3 block layer in the OPO process leads to a higher mobility in Ge transistors. By comparing two different oxidation methods, the results show that the OPO is an effective way to increase the interface layer quality which is contributing to the improved effective mobility of Ge pMOSFETs.
ISSN:1931-7573
1556-276X