Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD Modelling
The CFD modelling of heat transfer in a microtubular Solid Oxide Fuel Cell (mSOFC) stack has been presented. Stack performance predictions were based on a 16 anode-supported microtubular SOFCs sub-stack, which is a component of the overall stack containing 64 fuel cells. Both radiative and convectiv...
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Sciendo
2014-06-01
|
Series: | Polish Journal of Chemical Technology |
Subjects: | |
Online Access: | https://doi.org/10.2478/pjct-2014-0029 |
id |
doaj-e53eb281874b4ae38ed7cc948ebbfb31 |
---|---|
record_format |
Article |
spelling |
doaj-e53eb281874b4ae38ed7cc948ebbfb312021-09-05T14:00:59ZengSciendoPolish Journal of Chemical Technology1899-47412014-06-01162515510.2478/pjct-2014-0029pjct-2014-0029Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD ModellingPianko-Oprych Paulina0Kasilova Ekaterina1Jaworski Zdzisław2West Pomeranian University of Technology, Szczecin, Institute of Chemical Engineering and Environmental Protection Processes, al. Piastów 42, 71-065 Szczecin, PolandWest Pomeranian University of Technology, Szczecin, Institute of Chemical Engineering and Environmental Protection Processes, al. Piastów 42, 71-065 Szczecin, PolandWest Pomeranian University of Technology, Szczecin, Institute of Chemical Engineering and Environmental Protection Processes, al. Piastów 42, 71-065 Szczecin, PolandThe CFD modelling of heat transfer in a microtubular Solid Oxide Fuel Cell (mSOFC) stack has been presented. Stack performance predictions were based on a 16 anode-supported microtubular SOFCs sub-stack, which is a component of the overall stack containing 64 fuel cells. Both radiative and convective heat transfer were taken into account in the modelling. The heat flux value corresponded to the cell voltage of 0.7 [V]. Two different cases of the inlet air velocity of 2.0 and 8.5 [ms–1] were considered. It was found that radiation accounted for about 20–30 [%] of the total heat flux from the active tube surface, which means that the convective heat transfer predominated over the radiative one.https://doi.org/10.2478/pjct-2014-0029microtubular solid oxide fuel cell stackheat transfercomputational fluid dynamicstemperature distributions |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Pianko-Oprych Paulina Kasilova Ekaterina Jaworski Zdzisław |
spellingShingle |
Pianko-Oprych Paulina Kasilova Ekaterina Jaworski Zdzisław Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD Modelling Polish Journal of Chemical Technology microtubular solid oxide fuel cell stack heat transfer computational fluid dynamics temperature distributions |
author_facet |
Pianko-Oprych Paulina Kasilova Ekaterina Jaworski Zdzisław |
author_sort |
Pianko-Oprych Paulina |
title |
Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD Modelling |
title_short |
Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD Modelling |
title_full |
Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD Modelling |
title_fullStr |
Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD Modelling |
title_full_unstemmed |
Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD Modelling |
title_sort |
quantification of the radiative and convective heat transfer processes and their effect on msofc by cfd modelling |
publisher |
Sciendo |
series |
Polish Journal of Chemical Technology |
issn |
1899-4741 |
publishDate |
2014-06-01 |
description |
The CFD modelling of heat transfer in a microtubular Solid Oxide Fuel Cell (mSOFC) stack has been presented. Stack performance predictions were based on a 16 anode-supported microtubular SOFCs sub-stack, which is a component of the overall stack containing 64 fuel cells. Both radiative and convective heat transfer were taken into account in the modelling. The heat flux value corresponded to the cell voltage of 0.7 [V]. Two different cases of the inlet air velocity of 2.0 and 8.5 [ms–1] were considered. It was found that radiation accounted for about 20–30 [%] of the total heat flux from the active tube surface, which means that the convective heat transfer predominated over the radiative one. |
topic |
microtubular solid oxide fuel cell stack heat transfer computational fluid dynamics temperature distributions |
url |
https://doi.org/10.2478/pjct-2014-0029 |
work_keys_str_mv |
AT piankooprychpaulina quantificationoftheradiativeandconvectiveheattransferprocessesandtheireffectonmsofcbycfdmodelling AT kasilovaekaterina quantificationoftheradiativeandconvectiveheattransferprocessesandtheireffectonmsofcbycfdmodelling AT jaworskizdzisław quantificationoftheradiativeandconvectiveheattransferprocessesandtheireffectonmsofcbycfdmodelling |
_version_ |
1717810993590960128 |