A feasibility study of using a 3D-printed tumor model scintillator to verify the energy absorbed to a tumor
The authors developed a volumetric dosimetry detector system using in-house 3D-printable plastic scintillator resins. Three tumor model scintillators (TMSs) were developed using magnetic resonance images of a tumor. The detector system consisted of a TMS, an optical fiber, a photomultiplier tube, an...
Main Authors: | Tae Hoon Kim, Sangmin Lee, Dong Geon Kim, Jae Young Jeong, Hye Jeong Yang, Thomas Schaarschmidt, Sang Hyoun Choi, Gyu-Seok Cho, Yong Kyun Kim, Hyun-Tai Chung |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier
2021-09-01
|
Series: | Nuclear Engineering and Technology |
Subjects: | |
Online Access: | http://www.sciencedirect.com/science/article/pii/S1738573321001777 |
Similar Items
-
Characteristics of 3D Printed Plastic Scintillator
by: Kim Dong-geon, et al.
Published: (2020-01-01) -
Dose rate measurement of Leksell Gamma Knife Perfexion using a 3D printed plastic scintillation dosimeter
by: Sangmin Lee, et al.
Published: (2020-10-01) -
Performance of 3D printed plastic scintillators for gamma-ray detection
by: Dong-geon Kim, et al.
Published: (2020-12-01) -
Measurement of total scatter factor for stereotactic cones with plastic scintillation detector
by: Suresh H Chaudhari, et al.
Published: (2017-01-01) -
Advances on inorganic scintillator-based optic fiber dosimeters
by: Liang Ding, et al.
Published: (2020-10-01)