Static Load Tests, Short Series Interpretation
Statistic load test is the most commonly used method for estimation of the bearing capacity of piles. From the test we obtain the series a values: load-settlement, Q–s curve. In practice, it is extremely difficult to reach the critical load of the pile when the settlement turns out of control. The e...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Sciendo
2015-02-01
|
| Series: | Studia Geotechnica et Mechanica |
| Subjects: | |
| Online Access: | http://www.degruyter.com/view/j/sgem.2014.36.issue-2/sgem-2014-0019/sgem-2014-0019.xml?format=INT |
| Summary: | Statistic load test is the most commonly used method for estimation of the bearing capacity of piles. From the test we obtain the series a values: load-settlement, Q–s curve. In practice, it is extremely difficult to reach the critical load of the pile when the settlement turns out of control. The existing methods that allow bearing capacity to be calculated give the value which is very often 1/10 of the critical load. The question arises if it is possible based upon short series of load, i.e., 0–0.4 critical load, to predict the critical value of the load, with accuracy which is sufficient for practical calculation. The paper presents a method how to calculate the critical load based upon short series of load in the static load tests. |
|---|---|
| ISSN: | 0137-6365 2083-831X |