Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel

Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel

The turning, which consists of the removal of metal from the outer diameter of a rotating cylindrical workpiece, is one of the most common techniques for cutting, especially when finishing the product. The values of the cutting parameters, such as feed rate, cutting speed, and depth of cut, in a tur...

Full description

Bibliographic Details
Main Authors:	Adel Al-Shayea, Fawaz M. Abdullah, Mohammed A. Noman, Husam Kaid, Emad Abouel Nasr
Format:	Article
Language:	English
Published:	Hindawi Limited 2020-01-01
Series:	Advances in Materials Science and Engineering
Online Access:	http://dx.doi.org/10.1155/2020/5480614

Similar Items

Overview of predictive condition based maintenance research using bibliometric indicators
by: Mohammed A. Noman, et al.
Published: (2019-10-01)

Optimizing Multi-Response Parameters in Turning of AISI1040 Steel Using Desirability Approach
by: Srinu Gugulothu, et al.
Published: (2019-08-01)

Fretting wear characteristics of AISI 1040 steel alloy
by: Krishnamurti Singh, et al.
Published: (2019-03-01)

The study on the properties of AISI 4140 and AISI 1040 steel rods welded by friction welding
by: Thanee Toomprasen, et al.
Published: (2014-06-01)

Optimization of Multiple Objectives by Genetic Algorithm for Turning of AISI 1040 Steel Using Al2O3 Nano Fluid with MQL
by: M. Usha, et al.
Published: (2020-03-01)

New Integrated Model for Maintenance Planning and Quality Control Policy for Multi-Component System Using an EWMA Chart
by: Adel Al-Shayea, et al.
Published: (2019-01-01)

Corrosion inhibition of ferrite bainite AISI1040 steel in H2SO4 using biopolymer
by: P.R. Prabhu, et al.
Published: (2021-01-01)

Investigation of the Effect of Chip Breaker Form on Surface Roughness and Cutting Forces in AISI 1040 Steel Milling
by: İbrahim ÇAKMAK, et al.
Published: (2019-06-01)

Petri Net Model Based on Neural Network for Deadlock Control and Fault Detection and Treatment in Automated Manufacturing Systems
by: Husam Kaid, et al.
Published: (2020-01-01)

An Order Effect of Neighborhood Structures in Variable Neighborhood Search Algorithm for Minimizing the Makespan in an Identical Parallel Machine Scheduling
by: Ibrahim Alharkan, et al.
Published: (2018-01-01)

Machinability baja AISI 1040 pada proses bubut dengan variasi cutting speed dan feed rate
by: AAIA Sri Komaladewi, et al.
Published: (2012-11-01)

VARIATION OF CUTTING PARAMETERS IN THE PROCESS OF TURNING AISI 4340 STEEL ON SURFACE ROUGHNESS
by: M. Sobron Yamin Lubis, et al.
Published: (2019-07-01)

Colored Resource-Oriented Petri Nets for Deadlock Control and Reliability Design of Automated Manufacturing Systems
by: Adel Al-Shayea, et al.
Published: (2021-01-01)

Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts
by: Mohamed Fnides, et al.
Published: (2017-03-01)

Prediction of cutting tool vibration and surface roughness in hard turning of AISI52100 steel
by: Ambhore Nitin, et al.
Published: (2018-01-01)

Machining force comparison for surface defect hard turning and conventional hard turning of AISI 52100 steel
by: P. UMAMAHESWARRAO, et al.
Published: (2021-09-01)

Studying the Effect of Process Parameters on Part Depth in Single Point Incremental Forming of AA1050-H14 Aluminum Alloy Sheets
by: Adel Al-Shayea, et al.
Published: (2019-01-01)

Influences of Groove Angles and Filler Metals on 304L Stainless Steel to AISI 1040 Carbon Steel Dissimilar Joint by Gas Tungsten Arc Welding
by: Wahyu Restu Widodo Eriek, et al.
Published: (2019-01-01)

Monitoring of Tool Vibration for Magnetorheological Fluid Controlled Bar During Turning ff Hardened Aisi4340 Steel
by: Paul P. Sam, et al.
Published: (2015-06-01)

Study of Vibration-assisted Turning Process on Stainless Steel
by: Sheng-Jie Chang, et al.
Published: (2009)

Tribological Studies on AISI 1040 with Raw and Modified Versions of Pongam and Jatropha Vegetable Oils as Lubricants
by: Y. M. Shashidhara, et al.
Published: (2012-01-01)

Investigation and optimization of machining parameters influence on surface roughness in turning AISI 4340 steel
by: Deepanraj Balakrishnan, et al.
Published: (2020-01-01)

Using the Response Surface Method to Optimize the Turning Process of AISI 12L14 Steel
by: Karin Kandananond
Published: (2010-01-01)

The Influence of Tool Rake Surface Geometry on the Hard Turning Process of AISI52100 Hardened Steel
by: Hanzhong Xu, et al.
Published: (2019-09-01)

Model for Integrating Production Scheduling and Maintenance Planning of Flow Shop Production System
by: Adel Al-Shayea, et al.
Published: (2020-01-01)

Finite element simulation and regression modeling of machining attributes on turning AISI 304 stainless steel
by: Mathivanan A., et al.
Published: (2021-01-01)

Application of TOPSIS for multi response optimization of Process Parameters in dry hard turning of AISI 52100 steel
by: P. UMAMAHESWARRAO, et al.
Published: (2021-03-01)

Optimization of cutting parameters using Taguchi method during the face milling of AISI 1040 with coated and uncoated inserts
by: Gürcan SAMTAŞ
Published: (2016-01-01)

Optimization of cutting parameters using Taguchi method during the face milling of AISI 1040 with coated and uncoated inserts
by: Gürcan SAMTAŞ
Published: (2016-01-01)

Optimization of cutting parameters using Taguchi method during the face milling of AISI 1040 with coated and uncoated inserts
by: Gürcan SAMTAŞ
Published: (2016-01-01)

Modeling of Cutting Force in the Turning of AISI 4340 Using Gaussian Process Regression Algorithm
by: Mahdi S. Alajmi, et al.
Published: (2021-04-01)

Towards Optimization of Machining Performance and Sustainability Aspects when Turning AISI 1045 Steel under Different Cooling and Lubrication Strategies
by: Adel T. Abbas, et al.
Published: (2019-09-01)

Hard turning of martensitic AISI 440B stainless steel
by: Sobiyi, Kehinde K.
Published: (2015)

Optimization of process parameters for minimum cutting temperature and surface roughness in turning of AISI 410 stainless steel impeller
by: S. Venkatachalapathy, et al.
Published: (2019-01-01)

Influence of cutting speed on coated TiCN cutting tool during turning of AISI 316L stainless steel in dry turning process
by: Ali A.Y, et al.
Published: (2019)

Comparison and Evaluation of Deadlock Prevention Methods for Different Size Automated Manufacturing Systems
by: Emad Abouel Nasr, et al.
Published: (2015-01-01)

EXAMINATION OF THE CUTTING FORCES OF AISI 304 AUSTENITIC STAINLESS STEEL IN THE TURNING PROCESS WITH TITANIUM CARBIDE COATED CUTTING TOOLS
by: Özgür TEKASLAN, et al.
Published: (2007-02-01)

Mathematical modelling and optimization of surface quality and productivity in turning process of AISI 12L14 free-cutting Steel
by: B. Ben Fathallah, et al.
Published: (2019-05-01)

Evaluation of an Analytical Model in the Prediction of Machining Temperature of AISI 1045 Steel and AISI 4340 Steel
by: Jinqiang Ning, et al.
Published: (2018-10-01)

Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel
by: Mustafa Kuntoğlu, et al.
Published: (2020-09-01)

Cannot write session to /tmp/vufind_sessions/sess_8v454gjake3kbqp80r050gderj