Summary: | Modern steel plants produce today a large portfolio of various steel grades, many for end-uses demanding high quality. In order to utilize the maximum productivity of the continuous-casting machine, it is sometimes necessary to cast steel grades with different chemical compositions in one sequence. It is important, therefore, to know the possibilities of a specific continuous-casting machine to make the Intermix connections as short as possible. Any interference with established procedures may, however, have a negative impact on the cleanliness of the cast steel. Using physical and numerical simulation tools, it was found that reducing the steel level in the tundish during the exchange of ladles makes it possible to shorten the transition zone. However, when the steel level is reduced, the flow of steel is impaired, which can have a negative effect on the cleanliness of the cast steel and, in extreme cases, may even lead to entrapment of slag in the mold. The cleanliness of cast steel was evaluated using one of the most advanced tools for automatic steel cleanliness evaluation, AZtecFeature (Oxford Instruments, Abingdon, UK), which enables determination of the type, size, distribution, and shape, as well as the chemical composition, of individual types of non-metal inclusions.
|