|
|
|
|
LEADER |
02830 am a22002293u 4500 |
001 |
124636 |
042 |
|
|
|a dc
|
100 |
1 |
0 |
|a Sanchez, William David
|e author
|
100 |
1 |
0 |
|a Massachusetts Institute of Technology. Department of Aeronautics and Astronautics
|e contributor
|
700 |
1 |
0 |
|a Albee, Keenan Eugene Sumner
|e author
|
700 |
1 |
0 |
|a Davidson, Rosemary Katherine
|e author
|
700 |
1 |
0 |
|a de Freitas Bart, Ryan
|e author
|
700 |
1 |
0 |
|a Cabrales Hernandez, Alejandro
|e author
|
700 |
1 |
0 |
|a Hoffman, Jeffrey A
|e author
|
245 |
0 |
0 |
|a A preliminary architecture optimization for in-space assembled telescopes
|
260 |
|
|
|c 2020-04-14T20:20:05Z.
|
856 |
|
|
|z Get fulltext
|u https://hdl.handle.net/1721.1/124636
|
520 |
|
|
|a The current trend towards larger diameter space-based and ground-based telescopes reflects both improvements in manufacturing technology and the need for more light-gathering capability. Although ground telescopes can continue to grow in diameter using previous manufacturing and assembly techniques, spacebased telescope mirror diameters are limited by the fairing size of a single launch vehicle. Looking towards the future, the demand for larger diameter primary mirrors is expected to quickly outgrow the size of a single launch vehicle fairing. In this case, the only viable option for a larger diameter space telescope will be on-orbit assembly. This paper provides a preliminary framework to optimize the architectural trade-space of in-space assembled telescopes as well as a metric to quantify the relative cost of the designs. Key parameters driving the architecture of such a system were identified and enumerated. These include primary mirror segment size, raft (i.e., unit of segments ready for assembly) geometry and configuration, in-space assembly location, and launch vehicle selection. The results of the paper are presented through a Pareto Analysis which ultimately describes the optimal architecture against the trade-space considered. This includes design of fuel-efficient trajectories generated from the Circular Restricted Three-Body problem for transfer of components to the assembly and mission locations (e.g., Earth-Moon L1, Sun-Earth L2). Furthermore, an optimization scheme is demonstrated for launch vehicle packing/manifesting with constraints on component selection, payload limitations for reaching the desired assembly point, and scheduling of launch vehicle and components. ©2019 Paper presented at the 70th International Astronautical Congress (IAC), October 21-25, 2019, Washington D.C. keywords: in-space; telescopes; assembly; packing; optimization
|
520 |
|
|
|a NASA Space Technology Research Fellowship program (grant no. 80NSSC17K0077)
|
520 |
|
|
|a NASA Space Technology Research Fellowship program (grant no. NNX16AM72H)
|
655 |
7 |
|
|a Article
|
773 |
|
|
|t International Astronautical Congress
|