Sensitivity of Process Variables on Rigid Polyurethane Foaming
Inadequate understanding and/or control of the polyurethane rigid foam process normally requires five to ten percent overpack of cavities to obtain correct fill and foam characteristics. This practice of overpacking has resulted in excessive waste and cost.
Main Author: | Pugsley, Bruce A. |
---|---|
Format: | Others |
Published: |
BYU ScholarsArchive
1976
|
Subjects: | |
Online Access: | https://scholarsarchive.byu.edu/etd/7173 https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=8173&context=etd |
Similar Items
-
Effect of Rigid Polyurethane Foam Core Density on Flexural and Compressive Properties of Sandwich Panels with Glass/Epoxy Faces
by: saeed Nemati, et al.
Published: (2013-01-01) -
AN EVALUATION OF THE COMBUSTION TOXICITY OF TWO POLYMERIC FOAMS USING TWO TYPES OF INHALATION EXPOSURE CHAMBERS.
by: Wallach, Steven Brian.
Published: (1982) -
Structural, Thermal and Acoustic Performance of Polyurethane Foams for Green Buildings
by: Nar, Mangesh
Published: (2014) -
Characteristics of Microcellular Foamed Ceramic Urethane
by: Jin Hong, et al.
Published: (2021-05-01) -
Composites of Rigid Polyurethane Foams Reinforced with POSS
by: Sylwia Członka, et al.
Published: (2019-02-01)