Conductive Domain Walls in Ferroelectric Bulk Single Crystals

• Main Author: Schröder, Mathias
• Other Authors: Technische Universität Dresden, Fakultät Mathematik und Naturwissenschaften
• Format: Doctoral Thesis
• Language: English
• Published: Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden 2014
• Subjects: Domänenwand; Domänen; ferroelektrisch; Ferroelektrika; Lithiumniobat; Lithiumtantalat; Bariumtitanat; Barium-Kalzium-Titanat; Rasterkraftmikroskopie; Impedanz; Leitfähigkeit; domain walls; domain; ferroelectric; lithium niobate; lithium tantalate; barium titanate; barium calcium titanate; atomic force microscopy; conductivity; impedance; nanoimpedance microscopy; conductive AFM; PFM; Kelvin; ddc:530; rvk:UP 6300
• Online Access: http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-142571; http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-142571; http://www.qucosa.de/fileadmin/data/qucosa/documents/14257/Dissertation_Schr%C3%B6der_Mathias_Qucosa.pdf

Ferroic materials play an increasingly important role in novel (nano-)electronic applications. Recently, research on domain walls (DWs) received a big boost by the discovery of DW conductivity in bismuth ferrite (BiFeO3 ) and lead zirconate titanate (Pb(Zrx Ti1−x )O3) ferroic thin films. These achievements open a realistic and unique perspective to reproducibly engineer conductive paths and nanocontacts of sub-nanometer dimensions into wide-bandgap materials. The possibility to control and induce conductive DWs in insulating templates is a key step towards future innovative nanoelectronic devices [1]. This work focuses on the investigation of the charge transport along conductive DWs in ferroelectric single crystals. In the first part, the photo-induced electronic DC and AC charge transport along such DWs in lithium niobate (LNO) single crystals is examined. The DC conductivity of the bulk and DWs is investigated locally using piezoresponse force microscopy (PFM) and conductive AFM (c-AFM). It is shown that super-bandgap illumination (λ ≤ 310 nm) in combination with (partially) charged 180° DWs increases the DC conductivity of the DWs up to three orders of magnitude compared to the bulk. The DW conductivity is proportional to the charge of the DW given by its inclination angle α with respect to the polar axis. The latter can be increased by doping the crystal with magnesium (0 to 7 mol %) or reduced by sample annealing. The AC conductivity is investigated locally utilizing nanoimpedance microscopy (NIM) and macroscopic impedance measurements. Again, super-bandgap illumination increases the AC conductivity of the DWs. Frequency-dependent measurements are performed to determine an equivalent circuit describing the domains and DWs in a model system. The mixed conduction model for hopping transport in LNO is used to analyze the frequency-dependent complex permittivity. Both, the AC and DC results are then used to establish a model describing the transport along the conductive DW through the insulating domain matrix material. In the last part, the knowledge obtained for LNO is applied to study DWs in lithium tantalate (LTO), barium titanate (BTO) and barium calcium titanate (BCT) single crystals. Under super-bandgap illumination, conductive DWs are found in LTO and BCT as well, whereas a domain-specific conductivity is observed in BTO.