On Cross-Layer Design of Distributed MIMO Spatial Multiplexing Compliant Wireless Ad hoc Networks
IEEE 802.11n Wireless Local Area Networks (WLANs) employ Multiple-Input-Multiple-Output (MIMO), which significantly boosts the raw data rate at the Physical layer (PHY). But the potential of enhancing Medium Access Control (MAC) layer efficiencies by MIMO is still in its early stage and is the aim o...
| Main Author: | |
|---|---|
| Other Authors: | |
| Language: | en en |
| Published: |
2013
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/1974/8425 |
| Summary: | IEEE 802.11n Wireless Local Area Networks (WLANs) employ Multiple-Input-Multiple-Output (MIMO), which significantly boosts the raw data rate at the Physical layer (PHY). But the potential of enhancing Medium Access Control (MAC) layer efficiencies by MIMO is still in its early stage and is the aim of the research in this thesis. Many existing works in this field mainly employ distributed MIMO spatial multiplexing/Multi-User Detection (MUD) technique and stream sharing to enable multiple simultaneous transmissions. Most works require synchronization among multiple transmissions, split the channel, and aim for single-hop networks. In this thesis, a novel Hybrid Carrier Sense (HCS) framework is proposed, mainly at the MAC layer to exploit the power of MIMO. HCS senses the channel availability jointly by the virtual carrier sense and physical carrier sense. HCS does not require synchronization among nodes; each node independently and locally determines when to start its transmission. HCS not only shares the channel, but also exploits the bi-directional handshakes of the wireless transmissions and increases the number of simultaneous stream transmissions. For a network with M antennas in each node, HCS can accommodate 2x(M-1) streams instead of M streams achieved by all other existing works. Moreover, HCS is aimed for multi-hop wireless ad hoc networks, in which the hidden terminal, exposed terminal, and deafness problems greatly degrade network performance. The HCS framework incorporates solutions to these problems. HCS is implemented in an NS2 network simulator and the performance evaluation shows that HCS significantly outperforms MIMO-enabled IEEE 802.11 (in which MIMO is only used for enhancing the raw data rate in the physical layer), resulting in higher aggregate throughput, packet delivery ratio and fairness in multi-hop wireless ad hoc networks. The HCS framework will be in wide use in the future generation of wireless networks and opens up more research possibilities. Some ideas in the HCS framework can be applied not only for MIMO, but also for many other techniques surveyed in this thesis; or we may combine them with HCS to further boost the network performance. === Thesis (Ph.D, Electrical & Computer Engineering) -- Queen's University, 2013-10-15 21:46:15.983 |
|---|