Design and manufacture of low cost vaccine cooler

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007. === Includes bibliographical references (p. 58). === Vaccines are very sensitive to temperature, needing to be held between 2 and 80°C to maintain potency. In developing countries where electricity and fuel...

Full description

Bibliographic Details
Main Author: Panas, Cynthia Dawn Walker.
Other Authors: John G. Brisson, II.
Format: Others
Language:English
Published: Massachusetts Institute of Technology 2008
Subjects:
Online Access:http://hdl.handle.net/1721.1/40937
id ndltd-MIT-oai-dspace.mit.edu-1721.1-40937
record_format oai_dc
spelling ndltd-MIT-oai-dspace.mit.edu-1721.1-409372019-05-02T16:05:14Z Design and manufacture of low cost vaccine cooler Panas, Cynthia Dawn Walker. John G. Brisson, II. Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Mechanical Engineering. Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007. Includes bibliographical references (p. 58). Vaccines are very sensitive to temperature, needing to be held between 2 and 80°C to maintain potency. In developing countries where electricity and fuel supplies are unreliable, many vaccines are ruined due to thermal exposure. These are also the locations where vaccines are needed the most, yet often many of the vaccines given are ineffective. Long holdover vaccine coolers are designed to maintain a proper internal temperature during long periods of power loss. The most prevalent technology is the ice-lined cooler, but in the field these often have problem with freezing the vaccines. A vaccine cooler was designed that modifies the ice-jacket idea by separating the ice compartment and the vaccine chamber, connecting them through a heat transfer regulating device. The objective of this research is to design and prototype the heat transfer regulating device. After several design iterations a cooling loop filled with R-134a made of 1/8 piping, a 0.055 in ID capillary, and a Clippard normally-closed valve was combined with a modified car thermostat, using peanut oil as its working fluid, to create a thermosyphon type heat transfer device with a safety shutoff to prevent freezing. The prototype was manufactured and tested. It was found that with the proper amount of working fluid, it is possible to run the cooling loop at 4°C and pull heat from the vaccine chamber side to the ice. The peanut oil thermostat was tested and was found to open at a slightly lower temperature than expected, 2.5°C, but still within range. These results indicate that the concept is viable and should be tested in the vaccine cooler. by Cynthia D. Walker. S.B. 2008-03-27T18:25:22Z 2008-03-27T18:25:22Z 2007 2007 Thesis http://hdl.handle.net/1721.1/40937 212409598 eng M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 58 p. application/pdf Massachusetts Institute of Technology
collection NDLTD
language English
format Others
sources NDLTD
topic Mechanical Engineering.
spellingShingle Mechanical Engineering.
Panas, Cynthia Dawn Walker.
Design and manufacture of low cost vaccine cooler
description Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007. === Includes bibliographical references (p. 58). === Vaccines are very sensitive to temperature, needing to be held between 2 and 80°C to maintain potency. In developing countries where electricity and fuel supplies are unreliable, many vaccines are ruined due to thermal exposure. These are also the locations where vaccines are needed the most, yet often many of the vaccines given are ineffective. Long holdover vaccine coolers are designed to maintain a proper internal temperature during long periods of power loss. The most prevalent technology is the ice-lined cooler, but in the field these often have problem with freezing the vaccines. A vaccine cooler was designed that modifies the ice-jacket idea by separating the ice compartment and the vaccine chamber, connecting them through a heat transfer regulating device. The objective of this research is to design and prototype the heat transfer regulating device. After several design iterations a cooling loop filled with R-134a made of 1/8 piping, a 0.055 in ID capillary, and a Clippard normally-closed valve was combined with a modified car thermostat, using peanut oil as its working fluid, to create a thermosyphon type heat transfer device with a safety shutoff to prevent freezing. The prototype was manufactured and tested. It was found that with the proper amount of working fluid, it is possible to run the cooling loop at 4°C and pull heat from the vaccine chamber side to the ice. The peanut oil thermostat was tested and was found to open at a slightly lower temperature than expected, 2.5°C, but still within range. These results indicate that the concept is viable and should be tested in the vaccine cooler. === by Cynthia D. Walker. === S.B.
author2 John G. Brisson, II.
author_facet John G. Brisson, II.
Panas, Cynthia Dawn Walker.
author Panas, Cynthia Dawn Walker.
author_sort Panas, Cynthia Dawn Walker.
title Design and manufacture of low cost vaccine cooler
title_short Design and manufacture of low cost vaccine cooler
title_full Design and manufacture of low cost vaccine cooler
title_fullStr Design and manufacture of low cost vaccine cooler
title_full_unstemmed Design and manufacture of low cost vaccine cooler
title_sort design and manufacture of low cost vaccine cooler
publisher Massachusetts Institute of Technology
publishDate 2008
url http://hdl.handle.net/1721.1/40937
work_keys_str_mv AT panascynthiadawnwalker designandmanufactureoflowcostvaccinecooler
_version_ 1719034355150487552