Rear-gauging Avoidance for Five-Axis Surface Machining with a Flat-End Cutter
碩士 === 逢甲大學 === 機械工程學系 === 89 === In the cutter-path for five-axis surface machining with a flat-end cutter, the tool path is scheduled so that the scallop height formed by two adjacent machining paths is maintain constant. Along each machining, the inclination of the flat-end cutter is tuned adapt...
Main Authors: | , |
---|---|
Other Authors: | |
Format: | Others |
Language: | zh-TW |
Published: |
2001
|
Online Access: | http://ndltd.ncl.edu.tw/handle/36260686926628989255 |
id |
ndltd-TW-089FCU00489008 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-TW-089FCU004890082016-07-06T04:10:20Z http://ndltd.ncl.edu.tw/handle/36260686926628989255 Rear-gauging Avoidance for Five-Axis Surface Machining with a Flat-End Cutter 五軸端銑刀曲面加工之刀具干涉避免 CHU HUNG LIN 林矗宏 碩士 逢甲大學 機械工程學系 89 In the cutter-path for five-axis surface machining with a flat-end cutter, the tool path is scheduled so that the scallop height formed by two adjacent machining paths is maintain constant. Along each machining, the inclination of the flat-end cutter is tuned adaptively so that the tool-path interval can be chosen as large as possible. But it causes rear gauging easily. So we must to establish the algorithm for tool-interference avoidance so as to tune the tool inclination angle adaptively along the machining path. CHIH-CHING LO 羅致卿 2001 學位論文 ; thesis 37 zh-TW |
collection |
NDLTD |
language |
zh-TW |
format |
Others
|
sources |
NDLTD |
description |
碩士 === 逢甲大學 === 機械工程學系 === 89 === In the cutter-path for five-axis surface machining with a flat-end cutter, the tool path is scheduled so that the scallop height formed by two adjacent machining paths is maintain constant. Along each machining, the inclination of the flat-end cutter is tuned adaptively so that the tool-path interval can be chosen as large as possible. But it causes rear gauging easily. So we must to establish the algorithm for tool-interference avoidance so as to tune the tool inclination angle adaptively along the machining path.
|
author2 |
CHIH-CHING LO |
author_facet |
CHIH-CHING LO CHU HUNG LIN 林矗宏 |
author |
CHU HUNG LIN 林矗宏 |
spellingShingle |
CHU HUNG LIN 林矗宏 Rear-gauging Avoidance for Five-Axis Surface Machining with a Flat-End Cutter |
author_sort |
CHU HUNG LIN |
title |
Rear-gauging Avoidance for Five-Axis Surface Machining with a Flat-End Cutter |
title_short |
Rear-gauging Avoidance for Five-Axis Surface Machining with a Flat-End Cutter |
title_full |
Rear-gauging Avoidance for Five-Axis Surface Machining with a Flat-End Cutter |
title_fullStr |
Rear-gauging Avoidance for Five-Axis Surface Machining with a Flat-End Cutter |
title_full_unstemmed |
Rear-gauging Avoidance for Five-Axis Surface Machining with a Flat-End Cutter |
title_sort |
rear-gauging avoidance for five-axis surface machining with a flat-end cutter |
publishDate |
2001 |
url |
http://ndltd.ncl.edu.tw/handle/36260686926628989255 |
work_keys_str_mv |
AT chuhunglin reargaugingavoidanceforfiveaxissurfacemachiningwithaflatendcutter AT línchùhóng reargaugingavoidanceforfiveaxissurfacemachiningwithaflatendcutter AT chuhunglin wǔzhóuduānxiǎndāoqūmiànjiāgōngzhīdāojùgànshèbìmiǎn AT línchùhóng wǔzhóuduānxiǎndāoqūmiànjiāgōngzhīdāojùgànshèbìmiǎn |
_version_ |
1718337913776766976 |