快速原型－層狀成型法（LOM）之線上剝料製程研究

• Main Authors: Hou,Tian-Tsai, 侯健才
• Other Authors: 廖運炫
• Format: Others
• Language: zh-TW
• Published: 2001
• Online Access: http://ndltd.ncl.edu.tw/handle/77873528820135352990

碩士 === 國立臺灣大學 === 機械工程學研究所 === 89 === The purpose of this study is aimed at improving of the laminated object manufacturing (LOM) technology by eliminating some of the shortcomings of the process, such as the laser have to cut the section of useless material, decubing time is too long and some geometry parts are hardly produced by LOM process. A new Bridge-LOM process and a rule of bridge connection are proposed in the paper. The main idea of Bridge-LOM process is to perform cutting before bonding at the same positions, which save the problem of reposition. The rule of bridge connection, which takes the 2D contour information on each layer of the part, is based on two considerations: builds up bridges connecting the part and the outer frame and the possibility of bending. By doing so, 60%-70% waste material can be removed during the machining process. According, after machining process, the waste material remained, which are bridges left in the process, can be removed manually in short time. The Bridge-LOM process is not only save the time for cutting waste material by laser but also shorten the time of decubing. Besides, it makes the production of the hollow or shell shapes much easier. Therefore, it promotes both the performance efficiency of the laminate process and the manufacture ability regardless the geometry of the part. As a result, the Bridge-LOM process, with its advantage of removing waste material during the machining process, has much potential in the application of Rapid Tooling by laminating metal slices.