Selective Hydrogenation of Crotonaldehyde Using Bimetallic Pt-Sn/BN Catalyst

碩士 === 國立臺灣大學 === 化學工程學研究所 === 92 === In the present study we focused on the selective hydrogenation of crotonaldehyde over bimetallic BN-supported catalysts which were prepared by co-incipient wetness impregnation. The compositions of the catalysts were platinum 1.1 wt% and tin from 0.25 to 0.75 wt...

Full description

Bibliographic Details
Main Authors: Wei-Chih Chen, 陳威誌
Other Authors: C.-S. Wu
Format: Others
Language:zh-TW
Published: 2004
Online Access:http://ndltd.ncl.edu.tw/handle/72545438607362685555
id ndltd-TW-092NTU05063041
record_format oai_dc
spelling ndltd-TW-092NTU050630412016-06-10T04:15:57Z http://ndltd.ncl.edu.tw/handle/72545438607362685555 Selective Hydrogenation of Crotonaldehyde Using Bimetallic Pt-Sn/BN Catalyst 雙金屬觸媒Pt-Sn/BN在巴豆醛選擇性氫化之研究 Wei-Chih Chen 陳威誌 碩士 國立臺灣大學 化學工程學研究所 92 In the present study we focused on the selective hydrogenation of crotonaldehyde over bimetallic BN-supported catalysts which were prepared by co-incipient wetness impregnation. The compositions of the catalysts were platinum 1.1 wt% and tin from 0.25 to 0.75 wt%. Besides we also prepared monometallic catalysts 1.1wt%Pt/BN and 1.0wt%Sn/BN. We chose some commercial catalyst supports γ-Al2O3 and activated carbon to compare with BN. The reaction results revealed that the more tin in Pt-Sn/BN, the higher the selectivity to crotyl alcohol. The Pt-Sn(0.75)/BN has the selectivity to crotyl alcohol 0.63 under the conversion 60%. The improvement of the selectivity to crotyl alcohol was contributed to Snn+ as Lewis acid sites that adsorb and activate C=O bond. The catalysts were characterized by N2 adsorption BET method, hydrogen and carbon monoxide selective chemisorption, temperature programmed reduction (TPR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscope (TEM) technique. By the XPS analysis, we found mostly the tin remained Sn2+ after reduction in flowing hydrogen at 300oC and PtxSn alloys were formed in Pt-Sn/BN. However we could not find any PtxSn alloys in Pt-Sn/γ-Al2O3 by XRD as the PtxSn particles might be possibly too small to be detected by XRD. BN is more inert than γ-Al2O3 and interacts weakly with metal precursors, and therefore the metal aggregation is more severe. The selectivity to crotyl alcohol in Pt-Sn/γ-Al2O3 was also increased as the tin content increased at the same reaction temperature. However the yield of the butyraldehyde was decreased appreciably and it may be caused by the decrease of the Pt dispersion and the possibly small bimetallic clusters PtxSn. The yield of the crotyl alcohol was not improved apparently due to the different surroundings of the Sn2+. The reaction results of the Pt-Sn/AC were similar to those of Pt-Sn/γ-Al2O3. C.-S. Wu 吳紀聖 2004 學位論文 ; thesis 106 zh-TW
collection NDLTD
language zh-TW
format Others
sources NDLTD
description 碩士 === 國立臺灣大學 === 化學工程學研究所 === 92 === In the present study we focused on the selective hydrogenation of crotonaldehyde over bimetallic BN-supported catalysts which were prepared by co-incipient wetness impregnation. The compositions of the catalysts were platinum 1.1 wt% and tin from 0.25 to 0.75 wt%. Besides we also prepared monometallic catalysts 1.1wt%Pt/BN and 1.0wt%Sn/BN. We chose some commercial catalyst supports γ-Al2O3 and activated carbon to compare with BN. The reaction results revealed that the more tin in Pt-Sn/BN, the higher the selectivity to crotyl alcohol. The Pt-Sn(0.75)/BN has the selectivity to crotyl alcohol 0.63 under the conversion 60%. The improvement of the selectivity to crotyl alcohol was contributed to Snn+ as Lewis acid sites that adsorb and activate C=O bond. The catalysts were characterized by N2 adsorption BET method, hydrogen and carbon monoxide selective chemisorption, temperature programmed reduction (TPR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscope (TEM) technique. By the XPS analysis, we found mostly the tin remained Sn2+ after reduction in flowing hydrogen at 300oC and PtxSn alloys were formed in Pt-Sn/BN. However we could not find any PtxSn alloys in Pt-Sn/γ-Al2O3 by XRD as the PtxSn particles might be possibly too small to be detected by XRD. BN is more inert than γ-Al2O3 and interacts weakly with metal precursors, and therefore the metal aggregation is more severe. The selectivity to crotyl alcohol in Pt-Sn/γ-Al2O3 was also increased as the tin content increased at the same reaction temperature. However the yield of the butyraldehyde was decreased appreciably and it may be caused by the decrease of the Pt dispersion and the possibly small bimetallic clusters PtxSn. The yield of the crotyl alcohol was not improved apparently due to the different surroundings of the Sn2+. The reaction results of the Pt-Sn/AC were similar to those of Pt-Sn/γ-Al2O3.
author2 C.-S. Wu
author_facet C.-S. Wu
Wei-Chih Chen
陳威誌
author Wei-Chih Chen
陳威誌
spellingShingle Wei-Chih Chen
陳威誌
Selective Hydrogenation of Crotonaldehyde Using Bimetallic Pt-Sn/BN Catalyst
author_sort Wei-Chih Chen
title Selective Hydrogenation of Crotonaldehyde Using Bimetallic Pt-Sn/BN Catalyst
title_short Selective Hydrogenation of Crotonaldehyde Using Bimetallic Pt-Sn/BN Catalyst
title_full Selective Hydrogenation of Crotonaldehyde Using Bimetallic Pt-Sn/BN Catalyst
title_fullStr Selective Hydrogenation of Crotonaldehyde Using Bimetallic Pt-Sn/BN Catalyst
title_full_unstemmed Selective Hydrogenation of Crotonaldehyde Using Bimetallic Pt-Sn/BN Catalyst
title_sort selective hydrogenation of crotonaldehyde using bimetallic pt-sn/bn catalyst
publishDate 2004
url http://ndltd.ncl.edu.tw/handle/72545438607362685555
work_keys_str_mv AT weichihchen selectivehydrogenationofcrotonaldehydeusingbimetallicptsnbncatalyst
AT chénwēizhì selectivehydrogenationofcrotonaldehydeusingbimetallicptsnbncatalyst
AT weichihchen shuāngjīnshǔchùméiptsnbnzàibādòuquánxuǎnzéxìngqīnghuàzhīyánjiū
AT chénwēizhì shuāngjīnshǔchùméiptsnbnzàibādòuquánxuǎnzéxìngqīnghuàzhīyánjiū
_version_ 1718300318294343680