Study on the Molding Characteristics of Al-Sputtered PET Film During In-mold Decoration Process

Study on the Molding Characteristics of Al-Sputtered PET Film During In-mold Decoration Process

碩士 === 中原大學 === 機械工程研究所 === 94 === Abstract In-mold decoration is one of the advanced injection molding technologies. There are four steps in this processing : (1) ink printing, (2) high pressure forming, (3) die cutting, (4) insert molding. The advantages of these processing are not only to make co...

Full description

Bibliographic Details
Main Authors:	CHIU LIN-HSIUNG, 邱林雄
Other Authors:	Shia Chung S.Chen
Format:	Others
Language:	zh-TW
Published:	2006
Online Access:	http://ndltd.ncl.edu.tw/handle/22843386921097919071

Similar Items

Numerical Study on Heat Retardation of In-Mold Decoration Film in Injection Molding Processes
by: Yi-Han Li, et al.
Published: (2011)

Study of In-mold Decoration Processing for Micro-injection Molding
by: Jun-Yu Chen, et al.
Published: (2009)

Stady on the Three-dimensional In-mold Decoration and Out-side Mold Decoration
by: Pai-Ho Hsien, et al.

A Study of Mold Flow Analysis in Family Mold for In-Mold Decoration
by: Li, Cheng-Lung, et al.

Optimization for the Cooling Design of In-Mold Decoration and Mold Structure.
by: Shu-Haur Fan, et al.
Published: (2012)

Application of In-mold Decoration of Injection Molding in Three-Dimensional Molded Interconnect Devices
by: Ren-HaoLiu, et al.
Published: (2014)

A Study of Mold Flow Analysis in In-Mold Decoration Process for Thin Shell Surface
by: Po-Ching Huang, et al.
Published: (100)

The Study of the Heat Hesitation in the In-Mold Decoration Processing with Thin Film of Part Quality
by: Yen-Liang Chen, et al.
Published: (2010)

To Study the Effects of Part Shapes on the Elongation of Film by Out-Mold Decoration Processing
by: Hsu, Sheng-Hsun, et al.
Published: (2016)

Analysis of Sheet Molding Compound during Compression Molding Processing
by: Chao-Ming Lin, et al.
Published: (1999)

Effect of Mold Design on Mold Surface Heating in Injection Molding
by: Yu-Ching Chiu, et al.
Published: (2009)

Study of the Influence of process Conditions on the Quality of Out mold Decoration
by: Wu, Jhong-Sian, et al.
Published: (2015)

Application of magnetic force to the formation in mold decoration
by: Mong-Hsun Tsai, et al.
Published: (2010)

The Study of Investment Opportunity for In-Mold Decoration Technology
by: Chun-Mau Shen, et al.
Published: (2009)

Molding Characteristics Study of Thin-wall Injection Molding Process
by: Wu Chih Liang, et al.
Published: (1999)

Development of Three-dimensional In-mold Decoration Technology Combining Roll-to-roll, Thermoforming and Injection Molding
by: Ying-Chang Chen, et al.
Published: (2011)

A Study of the Integrate of Computer-Aided-Engineering in In-Mold Decoration Process
by: 唐兆璋
Published: (2006)

The use of carbon fiber-reinforced composites in In-mold decoration for injection process
by: WEI,SHANG-HUAN, et al.
Published: (2016)

Analysis of mold design and characteristics on ultrasonic-assisted injection mold
by: Shih-Kai Lin, et al.
Published: (2013)

The Influence of Injection Conditions on the Optical Characteristics of Plastic Lenses Fabricated by Using Inject-molding Processing
by: Chen-Hsiung Huang, et al.
Published: (2014)

Investigation of Mold Adhesion Phenomenon during the Injection Molding Process
by: Jian-YuChen, et al.
Published: (2012)

Effect of Stress State and Interfaial Characteristic on Biaxial Orientation and In-mold Printin of PC and PET Films
by: Ming-Yi Sung, et al.
Published: (2008)

A Combined In-Mold Decoration and Microcellular Injection Molding Method for Preparing Foamed Products with Improved Surface Appearance
by: Wei Guo, et al.
Published: (2019-05-01)

Applying of 3D In-mold Decoration Technology on Forming a Film with Conductive Circuits
by: LI, JI-HUAN, et al.
Published: (2017)

Optimal Design for Mold Plate in Mold-Design Navigating Process
by: Cheng-Hao Lin, et al.
Published: (2012)

Simulation of mold filling with solidification for injection molding process
by: 林紹文
Published: (1986)

Rotational Molding of Polyethylene Foam by Pellets
by: Ching-Hsiung Yang, et al.
Published: (2000)

Design on experimental apparatus of optical glass lens molding and study on molding characteristics
by: Yun-Hsien Lin, et al.
Published: (2008)

Study on the Process Characteristics of Ultra High Speed Injection Molding and Effects of Molding Parameters on the Mechanical Properties of Molded Parts
by: Hsien-Hsun Tseng, et al.
Published: (2008)

Application of magnetic force to the formation in mold decoration and the IMD film of adhesive layer viscous fluid
by: Meng-Hsun Tsai, et al.
Published: (2017)

Study on the Application of Nylon6 Nanocomposites for the In-Mold Decoration Technology
by: CHANG CHUN FU, et al.
Published: (2008)

Development of magnetron sputtering process with micro-mold for fabrication of copper electrodes device
by: HSU HSIANG-HAN, et al.
Published: (2016)

Fabrication of flexible UV nanoimprint mold with fluorinated polymer-coated PET film
by: Tsunozaki Kentaro, et al.
Published: (2011-01-01)

Investigation on Foamed PP/Nano-CaCO<sub>3</sub> Composites in a Combined in-Mold Decoration and Microcellular Injection Molding Process
by: Kui Yan, et al.
Published: (2020-02-01)

Study on The Process of In Mold Roller Injection Molding
by: Zong-Wei Huang, et al.
Published: (2006)

Evaluation Study of Induction Heat Technology Used in Mold Temperature Variation Control during Mold Compression Process
by: Yu-Tseng Lin, et al.
Published: (2015)

The study of electric characteristics between electro pads in molding process
by: Yung-chen Lin, et al.
Published: (2014)

Investigate the Characteristic of Thermal Conductivity of Gypsum Mold for Injection Molding
by: Hung-Chih Yeh, et al.
Published: (2017)

Study on the Molding Characteristics And Qualities of Injection Molded Thick Parts
by: Chien-Ju Hung, et al.
Published: (2005)

Study of Injection Molding Characteristics for PC/TPU In-mold Decration
by: Ren-De Hwang, et al.
Published: (2003)