Simulate of Ethyl Acetate by Reactive Distillation
碩士 === 明新科技大學 === 化學工程研究所 === 94 === This work studies the feasibility of using equilibrium model for the preliminary design of the production of ethyl acetate by reactive distillation (RD) process. The commercial simulator ChemCad is used for the analysis of the single reactive distillation column...
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2006
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/25223535588691894876 |
| Summary: | 碩士 === 明新科技大學 === 化學工程研究所 === 94 === This work studies the feasibility of using equilibrium model for the preliminary design of the production of ethyl acetate by reactive distillation (RD) process. The commercial simulator ChemCad is used for the analysis of the single reactive distillation column and the whole process.
The effects of design variables include: (1) the feed ratio of RD column (2) the rectifying section in RD column (3) the stripping section in RD column (4) the recycle rate of the bottom product of RD column (5) the organic reflux of RD column (6) the water added in the decanter (7) the recycle of stripper. By comparing the two processes with equilibrium controlled model and kinetic controlled model respectively, the trends of the effects of all variables are similar for these two processes and the deviations are also small.
During the preliminary process design stage, where kinetic data or the column internals are unknown, using the equilibrium mode to design the reactive distillation is suggested. Because it is an economic and efficient way to get reliable design variables.
|
|---|