The Technique Evaluation for The Manufacture of RDF (Residue Derived Fuel) from Agricultural Waste- straw

• Main Authors: Nien-Pin Wang, 王年斌
• Other Authors: 蘇艾
• Format: Others
• Language: zh-TW
• Published: 2007
• Online Access: http://ndltd.ncl.edu.tw/handle/09070256195091610520

碩士 === 元智大學 === 機械工程學系 === 95 === This research focuses on agricultural wastes–straw make Residue Derived Fuel , to conduct physical and chemical experiments and to analyze technology feasibility. The experiment includes the following parameters, three sets of adhesive (PR-382F, PR-81H and PR-276T), three sets of hot extrusion（120oC, 150oC and 180oC) and three sets of pressure extrusion (100, 130 and 160(kg/cm2)), to analyze the following metrics: moisture content, compressive strength, ash test, combustibility content , volatility content , fixed carbon, flammable sulfur, heat value and so on. The analysis uses SPSS statistical analysis program, within 5% tolerance, to conduct multiple variables analysis. The experimental results concludes that the best operating condition for this research of agricultural wastes - straw make residue derived fuel is, 1, PR-382F is the choice for adhesive because it has modest adhesive and high degree of glueyness. 2, hot extrusion should set at 120oC for C, H, O is not easy to consume and heat value is high. 3, pressure extrusion needs to set at 160 kg/cm2. The higher pressure, the higher compression strength and density, and the heat value is easier to increase. Overall, the research found that straw make contains similar elements before and after the process. Therefore, the technology of straw make residue derived fuel with adhesive process is highly feasible to produce high technology residue derived fuel . Due to lack of practical technology of residue derived fuel manufacture in the present, there are many related area to involve this application of this research. The technology will be also suggested as the reference of manufacturing process in the practical plant establishment.