| Summary: | 碩士 === 朝陽科技大學 === 設計研究所 === 97 === Domestic use of traditional production method of metal casting products, has yet to integrate a number of advanced hardware and software equipment, subject to the reasons for the traditional method, modeling is not difficult to achieve a breakthrough and a higher quality of castings, resulting in a long time young people are reluctant to accept traditional training, and lack of new blood gradually; for defective products to deal with casting, but also totally dependent on manual patch, and have re-produced or to carry out the repair work will result in resources, time, etc. The large amount of waste.
In this study, three case example by importing CAD / CAE and other advanced manufacturing process, and the use of school owned by a vacuum casting system a set of hardware R & D process, in the CAD stage, the use of modeling software to build Topmod model, QuickCast techniques can be burned Solution of the prototype, produced in accordance with rule of thumb flow casting, casting for dewaxing; RP completion of the prototype system over the use of silicone wax mold parts, the rule of thumb based on the production of wax tree, dewaxing casting; stage in the CAD flow mapping for CAE analysis Simulation of casting flaws in the case, as well as forecasting, production flow wax pieces, mix the pieces after the dewaxing wax casting, casting products and CAE results than the right, in order to enhance product quality, shorten development time and the future of metal casting products as the production process reference approach, in order to enhance industrial competitiveness.
|
|---|
