Summary: | 碩士 === 國立中山大學 === 電機工程學系研究所 === 97 === The design and regulation of power equipments which installed in distribution system are based on single direction power flow. When distributed generators (DG) are added into distribution system, it may cause some technical problems such as two-way current, fault capacity and power quality. In general, the utility should make sure that its power system could be operated safely and reliably before integrating DG into the system. If there are no complete measurements for DG, the capacity of DG would be restricted by fault current, short circuit capacity, feeder voltage or other problems. In this research, the focus is on the influence of DG operations in distribution system and the increase of DG integration capacity. The impacts of different combinations of DG generation profiles and control strategies are first analyzed, followed by the use of particle swarm optimization (PSO) technique to search for better feeder reconfigurations in order to increase DG integration capacity.
|