Summary: | 碩士 === 國立臺灣科技大學 === 自動化及控制研究所 === 99 === An optical Epoxy (EPO-TEK 301-2FL) may be used to replace the Ethylene Vinyl Acetate (EVA) for a solar cell module packaging. Firstly, this study explores the effect of different processing parameters for the Epoxy-based solar cell module. The main parameters include Epoxy thickness, curing temperature and curing time. The Taguchi method L9(33) and Grey Relational Analysis (GRA) are employed to obtain the best processing parameters for Epoxy-based solar cell module. Both output power (W) and fill factor (FF) are concerned as the multiple qualities of optimization to obtain the best processing parameters for Epoxy-based solar cell module.From the experimental results, the best combinations for Epoxy-based solar cell module are Epoxy thickness of 0.3mm, curing temperature of 80 ℃, and curing time of 2.5hr. It has the best output power of 4.14 W, which is better than the maximum output power of 4.10W from the original nine experiments. The output power is improved about 0.98%. Therefore, the results demonstrate that it is efficiently confirmed to obtain the best parameters for multiple qualities optimization by using such a Taguchi-Gray Relational Analysis method.
|