The Application of Tribological Analysis by Grey-Taguchi Method

• Main Authors: MING-ZE LIN, 林銘澤
• Other Authors: 謝宜宸
• Format: Others
• Language: zh-TW
• Published: 2013
• Online Access: http://ndltd.ncl.edu.tw/handle/g7cg6r

碩士 === 國立虎尾科技大學 === 機械與機電工程研究所 === 101 === When two mechanical elements by force after contact with each other and relative motion, we must consider the nature of the contact between the two surfaces, such as tribological deformation and contact phenomena. Experimental through multifunction tribological testing machine to simulate the contact element motion conditions, purposes in the analysis of the point contact element in contact under different forward force, lateral force and the rotational speed when the temperature, the friction coefficient and the resistance observed in the different control parameters. change differences. At present, on the interface of the precision components mostly only explore the positive force of the impact, however, the operation of the machine, the part of the lateral force components are frequently subjected. Therefore need to understand the lateral force on the tribological performance of mechanical components for moving, and thus improve the quality and enhance. Combined with gray relational data obtained through the experiment with the Taguchi method to analyze the correlation degree, learned by a factor Reaction: the positive load the parameters is the biggest factor to affect the outcome, the positive load the greater the higher the temperature will follow; lateral load to join, has little effect on the temperature, but the friction is the sign of abating. The results of this study also confirmed the grey Taguchi method comparable on the tribological tests associated..