Research cutting chatter detection system

• Main Authors: Yu-Cheng Wu, 吳育澄
• Other Authors: Jhih-Yong Huang
• Format: Others
• Language: zh-TW
• Published: 2014
• Online Access: http://ndltd.ncl.edu.tw/handle/41895190888608792227

碩士 === 國立勤益科技大學 === 機械工程系 === 102 === Chatter occurs when the high-speed machine tool cutting, often leads to poor processing quality, tool wear .. and other factors, many chatter detection method is usually used for post-processing analysis. In this study, regenerative chatter, to develop a online detection system; through time-domain and frequency-domain routing analysis of the vibration signals, with appropriate threshold values, in a very short period of time to determine whether the occurrence of Chatter, and computational analysis the Chatter frequency, as the basis for subsequent Chatter control. This system mainly includes: signal acquisition system, online monitoring systems, storage and post-processing systems, online chatter diagnostic systems. The experimental results show that when the cutting process, if satisfied amplitude delta time domain transient area two times higher than the frequency domain appear with the characteristic frequency instability can be judged Chatter. 　　Finally, experiments studied in this article online chatter detection system accuracy and practicality, the experimental results show that the online chatter detection system research of this paper, can instantly and accurately show the cutting dynamic, and can accurately and quickly determines that the judder has occurred, so the practical industrial applications, a very high practicality.