AVM Enabled Wheel Machining Automation System
碩士 === 國立成功大學 === 製造資訊與系統研究所 === 102 === Wheel machining technology now heads for integration of full automation. Since typical on-line measurement of wheel machining will cause utilization loss, current machining inspection is dominated by off-line measurement methods. This research discusses how t...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2014
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/32424584879122918360 |
| Summary: | 碩士 === 國立成功大學 === 製造資訊與系統研究所 === 102 === Wheel machining technology now heads for integration of full automation. Since typical on-line measurement of wheel machining will cause utilization loss, current machining inspection is dominated by off-line measurement methods. This research discusses how to apply the AVM (automatic virtual metrology) system to a WMA (wheel machining automation) system. The required hardware and software of the AVM system are presented and the configurations of the AVM and WMA systems are described in view of architecture. The process of enabling the AVM system to the WMA system is discussed in the aspect of procedure. For comparison, a simulation tool (FlexSim) has been adopted to evaluate the whole performance of applying the AVM system to various WMA systems. A real case study shows that the AVM system can predict accuracy items of a machined wheel within 10 seconds after machining with mean absolute percentage error less than 15%. The result indicates that the AVM system enables the WMA system to achieve the goal of real-time and on-line total inspection.
|
|---|