以低溫水熱法製備鋁摻雜氧化鋅奈米柱應用於染料敏化太陽能電池之介面特性分析

• Main Authors: Wei-Nine Chu, 邱薇寧
• Other Authors: Yang-Ming Lu
• Format: Others
• Language: zh-TW
• Published: 2014
• Online Access: http://ndltd.ncl.edu.tw/handle/z6n79j

碩士 === 國立臺南大學 === 電機工程學系碩博士班 === 102 === The development of renewable energy and hydrogen energy are important issues in the 21st century. The solar energy has attracted increasing attentions in recent years. Dye sensitized solar cells（DSSCs）have got much attentions due to possibilities of low fabrication cost, no need for elaborate apparatus to manufacture and flexibility. For the performance of dye-sensitized solar cells（DSSCs）, using ZnO nanorod arrays as electrodes is a hot study subject because of its excellent electro-optical properties. In this study, dye-sensitized solar cells（DSSCs）were manufactured with three different kind of ZnO nanorods as photoelectrodes. They are undoped zinc oxide nanorods, aluminum-doped zinc oxide nanorods and annealed ones. The electrochemical impedance spectroscopy was used to investigate the interface resistance of the cell. It is found that the power conversion efficiency of the cell increases with decreasing the interface impedance of ZnO nanorods. The aluminum-doped zinc oxide nanorods with single-crystalline quality and higher conductance make electrons transport much faster and result in higher photocurrent densities. The AC impedance provides the information of carrier transport resistance in the cells and helps us to enhance the conversion efficiency of dye-sensitized solar cells. Keywords: Dye-sensitized solar cell（DSSC）,Zinc oxide, Nano rod ,Electrochemical impedance spectroscopy（EIS）.