The study of 18R martensitic transformation in Fe-Mn-Al steels
碩士 === 國立臺灣科技大學 === 材料科學與工程系 === 104 === Fe-C-Mn-Al steels with the potential to replace some Ni-Cr stainless steels have been studied for decades. Phase transformations are the basic requirement for the development of Fe-C-Mn-Al steels. We have studied the 18R martensitic phase transformations of s...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2016
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/vzurpq |
| Summary: | 碩士 === 國立臺灣科技大學 === 材料科學與工程系 === 104 === Fe-C-Mn-Al steels with the potential to replace some Ni-Cr stainless steels have been studied for decades. Phase transformations are the basic requirement for the development of Fe-C-Mn-Al steels. We have studied the 18R martensitic phase transformations of steel A with the composition of Fe-0.098 C-28.5 Mn-8.8 Al and steel B Fe-0.28 C-19.6 Mn-7.7 Al in various heat treatments including heating to temperatures from 1350℃ to 1100℃ and cooling by water-quenching and/or air-cooling.
Alloy A is composed of ferrite grains which are occupied by 18R martensitic plates after quenching from 1200℃ and/or above. At 1150℃, some 18R martensitic plates appear in ferrite with a dual-phase structure. No 18R martensite forms in the ferrite of the dual phases at 1100℃. So we confirm that the low temperature limit for the formation of 18R martensite of the steels locates at temperature between 1150℃ and 1100℃.
Alloy B is composed of ferrite and austenite at temperatures above 1100℃. After water quenching at 1150℃ or above, the 18R martensitic plates appear in the ferrite grains with the grain size larger than the critical value. We have also observed the needle-free zones in the ferrite grains located nearby the austenite grains.
|
|---|