Implementation of External Hard Drive SATA to USB High Speed Interface

• Main Authors: LIU,JUNG-PIN, 劉容賓
• Other Authors: TIAN, CING-CHENG
• Format: Others
• Language: zh-TW
• Published: 2018
• Online Access: http://ndltd.ncl.edu.tw/handle/8uvqdv

碩士 === 中華大學 === 電機工程學系 === 107 === With the advance of science and technology，the need of data transferring is dramatically increased。The main purpose of this study is to help users safely store large amounts of data。Compared with USB Flash Drive，storage devices such as large-capacity Hard Disk Drive (HDD) or Solid-State Device (SSD) can store more data。 The fast sequence transmission interfaces USB 3.1 Generation 1 and SATA Generation 3 are mainly used in this bridge controller IC research。In this thesis， the basic transmission theory and circuit design will be introduced separately。 Meanwhile， the practical application and data will be demonstrated and analyzed in the end。 This bridge controller has been implemented and tested on a 60mm x 14.5mm printed circuit board (PCBA)。In addition，this bridge controller has high performance especially on its read/write speed which can be approximate at 209 MB/sec and has been tested on plenty of mainstream motherboards (platforms)。