none
碩士 === 國立中央大學 === 機械工程學系 === 106 === The controlled body of this paper is a blood pump, and it contains two systems, “Magnetic Bearing System” and “Motor System”. In this thesis, the finite element analysis of the two-phase permanent magnet synchronous motor in the blood pump is carried out. Using t...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2018
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/uy3p66 |
| id |
ndltd-TW-106NCU05489111 |
|---|---|
| record_format |
oai_dc |
| spelling |
ndltd-TW-106NCU054891112019-11-14T05:35:43Z http://ndltd.ncl.edu.tw/handle/uy3p66 none 兩相永磁同步馬達磁路分析及驅動應用於磁浮血液泵 SHI,YU-XUAN 石宇軒 碩士 國立中央大學 機械工程學系 106 The controlled body of this paper is a blood pump, and it contains two systems, “Magnetic Bearing System” and “Motor System”. In this thesis, the finite element analysis of the two-phase permanent magnet synchronous motor in the blood pump is carried out. Using the software, ANSYS Maxwell, to finish the magnetic circuit analysis of the motor on two dimension and three dimension. And then the induced electromotive force is obtained on each 2-D and 3-D analysis. It is compared with that by the actual measurement to verify the accuracy of the simulation. In this thesis, a current amplifier is used as the power supply for a two-phase motor drive system. Since the current amplifier can only output a single-phase current to the coil, it changes phase by adding a self-designed phase converter board. The field-oriented control can make the blood pump run successfully. Tung, Pi-Cheng 董必正 2018 學位論文 ; thesis 84 zh-TW |
| collection |
NDLTD |
| language |
zh-TW |
| format |
Others
|
| sources |
NDLTD |
| description |
碩士 === 國立中央大學 === 機械工程學系 === 106 === The controlled body of this paper is a blood pump, and it contains two systems, “Magnetic Bearing System” and “Motor System”. In this thesis, the finite element analysis of the two-phase permanent magnet synchronous motor in the blood pump is carried out. Using the software, ANSYS Maxwell, to finish the magnetic circuit analysis of the motor on two dimension and three dimension. And then the induced electromotive force is obtained on each 2-D and 3-D analysis. It is compared with that by the actual measurement to verify the accuracy of the simulation.
In this thesis, a current amplifier is used as the power supply for a two-phase motor drive system. Since the current amplifier can only output a single-phase current to the coil, it changes phase by adding a self-designed phase converter board. The field-oriented control can make the blood pump run successfully.
|
| author2 |
Tung, Pi-Cheng |
| author_facet |
Tung, Pi-Cheng SHI,YU-XUAN 石宇軒 |
| author |
SHI,YU-XUAN 石宇軒 |
| spellingShingle |
SHI,YU-XUAN 石宇軒 none |
| author_sort |
SHI,YU-XUAN |
| title |
none |
| title_short |
none |
| title_full |
none |
| title_fullStr |
none |
| title_full_unstemmed |
none |
| title_sort |
none |
| publishDate |
2018 |
| url |
http://ndltd.ncl.edu.tw/handle/uy3p66 |
| work_keys_str_mv |
AT shiyuxuan none AT shíyǔxuān none AT shiyuxuan liǎngxiāngyǒngcítóngbùmǎdácílùfēnxījíqūdòngyīngyòngyúcífúxuèyèbèng AT shíyǔxuān liǎngxiāngyǒngcítóngbùmǎdácílùfēnxījíqūdòngyīngyòngyúcífúxuèyèbèng |
| _version_ |
1719290587653341184 |