The Research of Comfortableness and Physical Properties to Coating One-way Moisture Transfer on Polyester Knitted Fabric

• Main Authors: Ho, Chi-Hsuan, 何其軒
• Other Authors: Lai, Chiu-Chun
• Format: Others
• Language: zh-TW
• Published: 2019
• Online Access: http://ndltd.ncl.edu.tw/handle/2mmy2h

碩士 === 中國文化大學 === 紡織產業碩士專班 === 107 === 　　The purpose of this study was to use a one-way moisture transfer to polyester knitted fabrics using a wet coating process. By changing the ratio of the carved wheel speed, it is explored whether the knitted fabric that has been given the moisture wicking effect is improved in terms of physical properties and comfortableness. 　　After using aqueous transfer coating, first add moisture wicking assistance in the dyeing process to enhance the hydrophilicity of the polyester knitted fabric. After the finalization of the finished setting product, the aqueous transfer coater is used to impart an auxiliary agent with a one-way moisture transfer effect. The carved wheel speed ratio of the coating machine was set to 10% and 20%, and the speed was both set to 9.5 m/min. The difference of one-way moisture transfer effect, air permeability, comfortableness, and other effects are compared. 　　By using the Liquid Moisture Management Properties of Textile Fabrics (MMT), the experimental results can be obtained, that is, when the carved wheel speed ratio is adjusted to 10%, all the physical properties are better than when the carved wheel speed ratio is 20 %. The result shows that when the carved wheel speed is relatively high, it has a negative effect on one-way conduction and even achieves water splashing effect. Therefore, adjusting to the most appropriate mechanical conditions is very important for coating engineering.