Accident prediction models for unsignalized intersections

• Main Author: Rodríguez, Luis F. (Luis Felipe)
• Format: Others
• Language: English
• Published: 2009
• Online Access: http://hdl.handle.net/2429/7882

The main objective of this thesis is to develop Accident Prediction Models (APM) for estimating the safety potential of urban unsignalized (T and 4-leg) intersections in the Greater Vancouver Regional District (GVRD) and Vancouver Island on the basis of their traffic characteristics. The models are developed using the generalized linear regression modeling (GLIM) approach, which addresses and overcomes the shortcomings associated with the conventional linear regression approach. The safety predictions obtained from GLIM models can be refined using the Empirical Bayes' approach to provide, more accurate, site-specific safety estimates. The use of the complementary Empirical Bayes approach can significantly reduce the regression to the mean bias that is inherent in observed accident counts. The thesis made use of sample accident and traffic volume data corresponding to unsignalized (both T and 4-leg) intersections located in urban areas of the Greater Vancouver Regional District (GVRD) and Vancouver Island. The data included a total of 427 intersections located in the cities of Victoria, Surrey, Nanaimo, Coquitlam, Burnaby and Vancouver. The information available for each intersection included the total number of accidents in the 1993-1995 period, traffic volumes for both major and minor roads given in Average Annual Daily Traffic (AADT) and type of intersection (T or 4-leg). Four categories of models were developed in this study: (1) models for the total number of accidents; (2) separate models for T and 4-leg intersections; (3) separate models for different regions (Vancouver Island, the Lower Mainland and Surrey); and (4) a model for Surrey including intersection control. Five applications of APM were used in this thesis. Four of them relate to the use of the Empirical Bayes refinement: identification of accident-prone locations, developing critical accident frequency curves, ranking the identified accident-prone locations and before and after safety evaluation. The fifth application provides a safety-planning example, comparing the safety of a 4-leg intersection to two staggered T-intersections. These applications show the importance of implementing APM as a tool to assess in a reliable fashion traffic safety, and design different safety strategies. === Applied Science, Faculty of === Civil Engineering, Department of === Graduate