Konstruktion av lapputmatningsmaskin

• Main Authors: Gregorovic, Antonia, Anikina, Elizaveta
• Format: Others
• Language: Swedish
• Published: Högskolan i Halmstad, Maskinteknisk produktframtagning (MTEK) 2014
• Subjects: Machinedesign; Machine; product; productdesign; label machine; Konstruktion; lapputmatningsmaskin; maskin; design; produktutveckling
• Online Access: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-25764

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process. Thecompany has only tested this process earlier by an operator who did this jobmanually.We came up with different solution during this project. The assessments of theseconcepts were made after Olsson's (1995) method and together with Terje Olsson- our supervisor at the company, later during the project. During the last stage ofthis project we chose to go with one final concept for a further developing. Alldemands made by the company were followed throughout the working process.We managed to develop a machine containing few and simple components, whichat the same time are very functional for its purpose. The design of our machine isdifferent from other industrial machines and labeling machines which makes itunique in its own way. This machine is meant for labels of two standard types ofpaper A5 and A6.The calculations we made during this project have been done in Catia V5 and hasbeen verified. We had a clear image of how our ideas should be in the beginningof this project and we knew how we wanted them to be we used our own theoriesand approaches in practice. Our theories and ideas showed in our sketches andprototypes. This along with other methods led to our final concept.We had also built some prototypes to be able to see if our ideas work in practice.The prototype led to some changes in our concepts. It gave us experience inprototype creating, functionality of the ideas and other areas.