Inclusions and/or Particles Engineering for Grain Refining Purposes in Ferritic Fe-20mass%Cr alloys
Compared to more common used austenitic stainless steels, ferritic stainless steels contain very low amounts of the expensive alloying element Ni. In addition, they have good corrosion properties, but are sometimes suffering from poor weldability and bad mechanical properties. This is mainly due to...
Main Author: | Janis, Jesper |
---|---|
Format: | Doctoral Thesis |
Language: | English |
Published: |
KTH, Tillämpad processmetallurgi
2010
|
Subjects: | |
Online Access: | http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-13012 http://nbn-resolving.de/urn:isbn:978-91-7415-599-0 |
Similar Items
-
Studies on High Alumina Blast Furnace Slags
by: Shankar, Amitabh
Published: (2007) -
A Study on the Influence of Steel, Slag or Gas on Refractory Reactions
by: Jansson, Sune
Published: (2008) -
Studies on dephosphorisation during steelmaking
by: Basu, Somnath
Published: (2007) -
A study of surface temperature and heat flux estimations in heating processes by solving an Inverse Heat Conduction Problem
by: Wikström, Patrik
Published: (2006) -
Thermally homogenous gasification of biomass/coal/waste for medium or high calorific value syngas production
by: Ponzio, Anna
Published: (2008)